|
TECHNICAL SPECIFICATIONS
|
|
Electrical
|
|
|
Rated Power:
|
200W rms. into 8 ohms. 400W rms into 4 ohms, continuous sine both channels driven.
|
|
Distortion:
|
Less than 0.03% THD at rated power and 1KHz. less than 0.05% at rated power
|
|
|
and 20KHz (into 4 - 8 ohms)
|
|
Signal to Noise:
|
Better than 130dB (A weighted) at tull power, better than 85dB (A weighted) ret 1W
|
|
|
into 8 ohms
|
|
Frequency response:
|
0.5 Hz to 48KHZ +0. -3dB
|
|
|
5 Hz to 30KHZ +0. - 0.5dB
|
|
Phase shift
|
Less than +/-17 degrees total from 5 Hz to 22.5KHZ
|
|
Power consumption:
|
Max 1,2kW total at better than 0.95 power factor
|
|
Fuse rating:
|
16A thermal breaker fitted to the amplifier back panel.
|
|
Protection:
|
Fully electronic with relay speaker disconnect on DC error, short circuit output,
|
|
|
or continuous overload and/or clipping.
|
|
Sensitivity:
|
26dBV
|
|
Phase:
|
Non inverting, ret XLR pin 2(+) or phono input.
|
|
Mechanical
|
|
|
Input sockets:
|
2 x XLR for balanced line operation
|
|
|
2 x Phono for single ended operation (switch selectable)
|
|
Output sockets:
|
2 x WBT-0765 4mm binding posts per channel.
|
|
Finish:
|
Bead Blasted anodised aluminium alloy casework and heat-sink assembly, glass lens.
|
|
|
Power on/off switch and indicator. Filtered IEC mains input socket.
|
|
Weight:
|
18 Kg approx.
|
|
Size:
|
437 x100 x300 mm (WxHxD) approx.
|
